SAFETY GLOVES AND HAND PROTECTION

Product Details:

Kevlar® Technology outside. 100% cotton lining. Gauge 7.Exterior 100% Kevlar® (short fibres).
100% Cotton inside.
Kevlar® is a registered trademark of DuPont de Nemours.

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS:

Kevlar®/ Cotton knit

Optimum performance for cuts and heat thanks to the thickness with the cotton lining

Knit Gauge 7

Excellent compromise between thermal resistance and dexterity

100% textile

Ambidextrous
Washable

10 cm ribbed cuff

Better protection of the arteries

Additional Information:

• Delivery Time: Ready Stock

Product Details:

• PVC dotted gloves
• Double side blue shell with the blue dot
• Seamless polyester cotton
• 7 gauge shell
• Both sides dot Knit wrist
• Weight: 60 grams per pair
• Industry: Suitable for all types of industries
• Application: All types of general use, material handling, high dexterity Mechanical Hazard

Additional Information:

• Delivery Time: Ready Stock

Product Details:

 Cut Level E Heat and Fire Resistant Gauntlets

Heat handling glove that scores a maximum score on all tests for EN407

Maximium 4 out of 4 for:

• Burning Behaviour
• Contact Heat
• Convective Heat
• Radiant Heat

EN388 Mechanical Handling:

 

 

• 2 out of 4 for Abrasion.
• 5 out of 5 for Cut Resistance.
• 4 out of 4 for Tear Resistance.
• 1 out of 4 for Puncture Resistance.
• Cut Level E

This is a competitively priced heat resistant glove that outperforms most gauntlets at higher prices.

 

 

One Size Glove

Additional Information:

• Delivery Time: Ready Stock

Product Details:

350 to 500°C Degrees Extreme Heat Handling Gloves with Aramid Aluminised Back 

 

3-layer protective gloves against heat and mechanical risks with an aluminium coated aramid on the back of the hand.

Features of 350 to 500°C Degrees Extreme Heat Handling Gloves with Aramid Aluminised Back :

• Recommended for handling hot objects up to 500°C over brief periods.
• Protection against contact, heat and flame.
• Abrasion, cut and tear resistant. Cut Level 5.
• Made with a heat resistant aluminized layer on the back to provide extra protection against radiant heat and molten metal splash.

Material:

 

• Palm: aramid - 600 g/m2
• Back of hand: aluminium coated aramid - 370 g/m2
• Insulation layer: wool
• GoodPRO line Z are designed for foundries, engineering, metallurgical and glass industry.
• Length: 35 cm

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Nitrile with cotton flocklining. Length: 33 cm. Thickness: 0,40 mm.Support: 100% nitrile.
Flocking: 100% cotton.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

We offer Meat Chopping gloves (Cut resistant)

These gloves are ideal for Meat Chopping. It protects from cuts and injuries while chopping the meat.
It is a mandatory product in Star Hotel Kitchens, to safeguard the hand as well as the food.

• Durable stainless steel strap is bacteria-resistant and won’t rust. Wrist length cuff. Wide, spring metal strap conforms comfortably to the wrist.
• Constructed of high tensile stainless steel rings for the highest protection against cuts, slashes and lacerations.
• Reversible gloves are tapered to contour to the shape of the hand for a comfortable fit.
• Construction is four ring joined, even at the seams to prevent dangerous knife sticks.
• No clips or fasteners to snag or come lose, strap is sealed within the mesh for a clean, comfortable and secure fit.
• Color coded tags for easy size identification.

APPLICATIONS: Meat Processing, Food Service, Animal Control, and Fishing.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

• Nylon knitted gloves, nitrile rubber coating on palm and around the fingers
• 13 gauge seamless shell
• Smooth palm
• Knit wrist
• Liner colour White
• Coating colour: Grey
• Industry: Automobile, electronics, engine plant assembly and assembly line of all industries
• Application: Handling oily and greasy products, light fabrication, high abrasion and dexterity
• Standard: EN388:2016 4131X

Additional Information:

• Delivery Time: Ready Stock

Product Details:

ATG MaxiFlex® Ultimate™ Micro Foam Nitrile Palm Coated Assembly Gloves

TOUCH SCREEN COMPATIBLE
Ultra  Lightweight with the thinnest palm thickness for a glove of this kind
Like a second skin, without losing out on performance,

dermatologically accredited and pre-washed prior to packaging

Made using AirTech® Tecnology which means the glove delivers 360º breathability, not just on the back of the hand like other gloves.
Micro-Cup Micro-Foam Nitrile coating gives amazing grip.

We have lots of customers who say these gloves really are worth the money
they last 4-5 times longer than any equivalent. The mechanics who look after our vehicles
use these now, 1 pair is lasting a month and they don't smell which is another reason
people throw gloves away.

Sizes Available 5,6,7,8,9,10,11,12

EN 388 Score - 4 1 3 1

Additional Information:

• Delivery Time: 2 to 3 Days

Product Details:

Product details

• Lightweight Poly/Cotton Grip Glove

  • For use in transport, distribution, and logistics
  • Handling of Packaging Materials
  • Economic
  • PVC dots on palm for enhanced grip
  • Gauge 7

Additional Information:

• Delivery Time: Ready Stock

Product Details:

ECONOCUT high performance fibre. Nitrile coating on palm and fingertips. Gauge 13. Bag of 3 pairs.Support: ECONOCUT fibre.
Coating: nitrile.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Deltaplus Cryogenic Freezer Gauntlets

Work safely in temperatures down to -196°C (a few seconds)

Water-repellent goatskin full grain leather  (TECHNICUIR). 

Aluminized polyester insert. 
Hand and cuff with wool lining. 
20 cm cowhide split leather cuff
Length: 40 cm.
Thickness 1,10 à 1,30 cm. 
Synthetic lining. 
Kevlar® thread seams.

Adhesive tape :
• Quick fitting and removal
Conform to MR019 Tested to Nitrogen Gas

Water-repellent treatment:
• Resistance to water penetration
• Better abrasion
• More comfort and flexibility

Aluminised polyester:
• Thermal protection

Additional Information:

• Delivery Time: Ready Stock

Product Details:

 Impact, Cut & Cold Resistant Thermal Safety Gloves

Th e Portwest A729 glove is cut resistant and thermal. Featuring an extra layer of TPR for impact resistance and flexibility.  The palm is nitrile with microfoam for grip and protects against water penetration and liquids. Made ergonomically for comfort and dexterity. Designed for colder and dry conditions.
13 gauge liner for excellent fit and a hook loop strap on the wrist for a safe fit.

Portwest Impact, Cut & Cold Resistant Thermal Safety Gloves Specifications:

• Conforms to EN 388:2016
• Abrasion - 4
• Cut - X
• Tear - 4
• Puncture - 2
• EN ISO Cut level C protection

Additional Information:

• Delivery Time: Ready Stock

Product Details:

DuPont™Kevlar® Double Knit Cut and Heat Protection Safety Sleeve with Knit Wrist

20" (50cm) Double Knit Heat and Cut Resistant DuPont™Kevlar® Safety Work Sleeve. Tested to EN388:2016 cut level C,                                                                                                                                                                                                           Tested to EN470 for resistance to contact heat Level 2: 250°C
Ideal for glass handling, sheet metal and applications where heat is also a hazard, Soft and comfortable kevlar material make these ideal for wearing for long periods.

20" DuPont™Kevlar® Double Knit Cut and Heat Protection Safety Sleeve with Knit Wrist  Specifications:

• Conforms to EN 388:2016
• Abrasion - 1
• Cut - X
• Tear - 4
• Puncture - 3
• EN ISO Cut level C protection
• EN407:2004 - Contact Heat Level 2

Features & Benefits:

• Cut resistant Kevlar Aramid Yarn
• Heat Resistant to Contact Heat 250°C
• Cut Level 3 Protection

 

Additional Information:

• Delivery Time: Ready Stock

Product Details:

DuPont™ Kevlar® Double Knit Cut and Heat Protection Safety Sleeve with Thumb Slot

18" (45cm) Double Knit Heat and Cut Resistant DuPont™Kevlar® Safety Work Sleeve. Made from a double layer of aramid yarn for enhanced protection, These soft and comfortable kevlar material make this ideal for wearing for long periods. Thumb slot helps keep the sleeve on and also protects the palm area. Tested to EN388:2016 cut level C, and also tested to EN470 for resistance to contact heat Level 2, 250°C.

Ideal for glass handling, sheet metal and applications where heat is also a hazard.

Also available in 3 other sleeve lengths, 10", 14" and 22" 

18" DuPont™ Kevlar® Double Knit Cut and Heat Protection Safety Sleeve with Thumb Slot Specifications:

• Conforms to EN 388:2016
• Abrasion - 1
• Cut - X
• Tear - 4
• Puncture - 3
• EN ISO Cut level C protection
• EN407:2004 - Contact Heat Level 2

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Honeywell  : 2058685 Cryogenic Gloves

 Feature :

 Water-repellent silicone cowhide grain leather glove. Fully lined with 2 aluminium / fleece layers.

Gunn cut, winged thumb, crispin type.

Reinforcement between thumb and index.

200 mm split leather cuff. Velcro adjustment strap on side of the palm. Thickness leather only 1.1/1.3 mm.

Benefit :

Comfort :

The US assembly, the winged thumb and flexibility of the materials used make this glove anatomical, thus providing excellent comfort.

The Velcro fastening tab gives the glove good support.

 Resistance

The silicone cowhide grain leather ensures good flexibility, even at a low temperature as well as water repellence and good mechanical protection.

Its polar double insulation offers outstanding protection against the cold and rays. The reinforcement between the thumb and index finger increases the glove's mechanical resistance and durability by strengthening the areas of wear.

 

Hygiene

The hide cuff offers good forearm protection against mechanical hazards and limits any risk of intrusion.

Description:

• Water-repellent silicone cowhide grain leather glove.
• Fully lined with 2 aluminium/fleece layers.
• Gunn cut, winged thumb, crispin type.
• Reinforcement between thumb and index.
• 200 mm split leather cuff.
• Velcro adjustment strap on side of the palm.
• Product Technology : Cut and Sewn
• Thickness : leather only 1.1/1.3 mm
• Harmlessness :
• In conformity with the European standards.
• Dexterity : Class 4
• Size : 9/10

Additional Information:

• Delivery Time: ready ex-stock or prior to stock availability

Product Details:

• Nylon knitted gloves with latex coating on palm and all around the fingers
• 13 gauge shell
• Crinkle palm
• Knit wrist
• Liner colour: Red
• Coating colour: Black
• Industries: Automotive, Machinery and Equipment Metal
  fabrication
• Application Assembly, gardening, woodworking, gripping
• Standard: EN388:2016 3131X

Additional Information:

• Delivery Time: Immediate delivery ex-stock

Product Details:

Performance requirements are high in gloves made to protect the hands from cut and heat. Our products have been manufacturer by certified and tested fabric under stringent norms and are well- suited for protection against cut abrasion, puncture, radiant heat, and other mechanical and thermal risk. It is heat resistant up to 350C

Standard Sizes: 12”,14”18”20”22” or customisation can be done.

Additional Information:

• Delivery Time: ready ex-stock or prior to stock availability

Product Details:

High performance polyethylene support. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed inside reinforcement on palm. Kevlar® thread on all the seams.Support: High performance polyethylene fibres.
Coating: nitrile.
Back reinforcement: TPR.
Reinforcement on thumb/forefinger: PVC.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

• Poly Cotton Liner Palm Crinkled Latex Coated
• 2 Thread Poly-cotton premium quality cotton with latex coating on palm and around the fingers
• 10 gauge shell
• Crinkle palm
• Knit wrist
• Liner colour: Yellow
• Coating colour: Green
• Industries: Automotive, Machinery and Equipment Metal fabrication
• Application: Assembly, gardening, woodworking, gripping
• Standard: EN388:2016: 3243A

Additional Information:

• Delivery Time: Ready Stock

Product Details:

Product Features
CE Marked.
Available in Size 6/7 – Small, Size 7/8 – Medium, Size 8/9 Large, Size 9/10 X-Large and Size 10/11 – XX-large.
Conforms to EN388:2016 3,1,1,0,X, EN374-1:2016 Part 1 Type A and EN374-5:2016 Part 5.
30cm/ 12″ in length.
0.75mm thickness.
Excellent dexterity.
Excellent resistance to abrasion.
Good heat resistance.
Flock lined to absorb perspi­ration.
Non-slip grip pattern to palm and fingers providing excellent grip in both damp and dry envi­ron­ments.
Manufactured from 100% neoprene with a 100% cotton flock lining.
Excellent chemical resistance. Protects against chemicals, greases and hydro­carbons.
100% Waterproof.
Sold in pairs.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS:

Double full latex coating

1st smooth latex coating : waterproof
2nd foam latex coating : good adhesion

Very good resistance to cold and humidity

Ideal in cold environments down to -30°C

Brushed acrylic support

Maintenance of warmth during outdoor work
Great comfort of use

The versatility of the protections make these gloves real assets in all climatic circumstances!

Inside: 100% acrylic gauge 10. Outside: 100% polyamide gauge 15. Full latex coating of the hand. Second foam latex coating on palm and fingertips.Support: polyamide/ acrylic.
Coating: Latex.

Additional Information:

• Delivery Time: Ready Stock

Product Details:

18" (45cm) HEATnocut high performance fibre Cut Level C  Heat Resistant Safety Sleeve with Thumb Slot (each)

45cm Cut Level C Heat Resistant Knitted Sleeve made from HEATnocut high performance fibre. 

Heat Resistant up to 100°C.

REGULATION (EU) 1935/2004 CONTACT WITH FOOD PRODUCTS

GLOB MIGR Food contact - Overall Migration 

. Contact with wet or watery food

. Contact with fatty foods

 

. Contact with acidic foods

Additional Information:

• Delivery Time: Ready Stock